Fibaro Single Switch 2 - Controls Loads Up to 2KW


Single Switch 2 module to control One Load up to 2KW

  • Enables z-wave control of one switch or appliance.
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • 3-wire lighting Icon



Choosing the suitable relay.


The Relay 2 X 1.5kW shall be used for turning "on or off" 2 different switches.  It is important to make sure that if this switch is going to be installed in the wall switch a NEUTRAL WIRE (Blue or Black) & LIVE WIRE (Brown or RED) is present.  If not a neutral wire is to made available or else it can be installed to the ceiling rose.  If you need additional information do not hesitate to contact us on 79495488 or on

The Relay 1 X 2kW shall be used for turning "on or off" ONLY 1 switch.  However it is capable for loads up to 2kW example electrical kettle.  These are mostly used for domestic appliances. 


What if there is not enough space in the ceiling ?

If there is not enough space a DIMMER should be used since it does not require a NEUTRAL WIRE.  However this controls only one switch,  therefore for example to control 2 different switches 2 Dimmer relays must be used.

Related Products